5046

The 5046 Series are stacking heights range from 3.0mm to 4.5mm. These series feature Kyocera’s original receptacle contacts, realizing secure mating with a fine “click” feeling and high reliability. Designed for automatic mounting machines, packaged in tape and reel.

5047

The 5047 Series are Board to Board Connectors featuring a stacking height of 5.0mm/7.0mm.These series feature Kyocera’s original receptacle contacts, realizing secure mating with a fine “click” feeling and high reliability. Designed for automatic mounting machines, packaged in tape and reel.

5804

The 5804 Series are 0.4mm pitch, ultra low profile Board to Board Connectors featuring a stacking height of 0.9mm/1.5mm/2.0mm. These products were developed to meet market needs for miniaturization of Smartphone, mobile phones, digital AV equipment, etc. Space saving is greatly achieved with a width of 2.4mm.

5806

The 5806 Series are Board to Board Connectors with a fine pitch of 0.4mm and an ultra-low stacking height of 0.6mm. These products feature the width of 1.9mm on the short side, which contributes to downsizing in small electronic equipment.

5843

The 5843 Series are Board to Board Connectors with a pitch of 0.35mm, which is reduced by 0.05mm compared with our conventional products. In addition, these series have space-saving features with a stacking height of 0.8mm/1.0mm/1.5mm and width of 2.4mm. The bottoms of the connectors are insulated and avoid exposure of contacts, thus enabling flexible designs on printed circuit boards.

5861

The 5861 Series are space-saving Board to Board Connectors featuring a fine pitch of 0.35mm, stacking height of 0.6mm (between boards) and a width of 1.95mm. With the metals covering both ends, the connector, with narrow pitches and low profile though, realizes the structurally high robustness and smooth guiding function for mating to prevent breakage of the insulator housing and contact caused by misaligned mating. The metals at both ends of which rated current is 5.0A/metal tab enable to carry a large current.

5863

The 5863 Series are space-saving Board to Board Connectors featuring a fine pitch of 0.35mm, stacking height of 0.8mm (between boards) and a width of 2.3mm. With the metals covering both ends, the connector, with narrow pitches and low profile though, realizes the structurally high robustness and smooth guiding function for mating to prevent breakage of the insulator housing and contact caused by misaligned mating. The metals at both ends of which rated current is 5.0A/metal tab enable to carry a large current.

5897

The 5897 Series are space-saving Board to Board Connectors featuring a fine pitch of 0.35mm, stacking height of 0.8mm (between boards) and a width of 2.3mm. In addition to its narrow pitches and low profile as with the conventional products containing the robust metals, the metal fittings covering both ends prevent breakage of the insulator housing and contacts due to misalignment in their mating. Thus it is a connector that realizes high robustness and smooth guide into mating. Besides the above, metal fittings are also provided inside the receptacle connector to increase the strength of the connector.The metals at both ends of which rated current is 3.0A/metal tab enable to carry a large current.

7129

The 7129 Series is board to board connector which is capable of conducting high current up to 10A . Although it is a space-saving product with 0.7mm stacking height and a 2.2mm in width, it achieves high robustness and smooth mating by attaching metals on both side-ends to prevent damage to insulator housings and contacts due to mating in a misaligned way.

6214

The 6214 Series is 0.5mm pitch, ZIF, vertical, SMT type FFC/FPC Connectors with slide locks. Total heights is 4.1mm.

6240

The 6240 Series are low profile, 0.5mm pitch, height of 2.0mm, ZIF, right angle, SMT, front-lock type FPC/FFC Connectors.

6244

The 6244 Series are 0.5mm pitch, Non-ZIF, vertical, SMT type FPC/FFC Connectors.

6274

The 6274 Series is 0.5mm pitch, ZIF, vertical, SMT type FFC/FPC Connectors with slide locks.

6277

The 6277 Series are 0.5mm pitch, ZIF, right angle FPC Connectors with dual-sided contacts.
These connectors feature a low profile height of 0.9mm and are applied in LCDs for small portable equipment.

6284

The 6284 Series are low profile, 0.5/1.0mm pitch, Non-ZIF connectors featuring a height of 1.5mm and width of 4.0mm.
These products are cost friendly and can be utilized in versatile applications including downsized digital home electric appliances.

6287

The 6287 Series are 0.4mm pitch, bottom contact, ZIF, right angle, SMT type FPC/FFC Connectors with front locks. These series are developed for connections with high-pin-count FPCs in notebook PCs, DVDs, LCDs, FPDs (Flat Panel Displays), etc.

6293

The 6293 Series are low profile, space-saving FPC Connectors which feature a pitch of 0.3mm, height of 0.9mm, and width of 3.55mm^* for mounting areas.*Width in actuator closed state:3.9mm
These products are dual-sided contact, LIF, right angle, SMT type connectors.

6298

The 6298 Series are low profile connectors specially designed for LCD modules with back-light requirements. These products are 0.5mm pitch, bottom contact, ZIF, right angle, SMT, back-lock type connectors with heights of 0.9mm. FPCs with notches ensure accurate insertion into the connectors.

6809

The 6809 Series possess enhanced robustness after implementing measures aimed at reducing breakage of connectors caused by human error. These low profile products feature a pitch of 0.5mm, bottom contact, front-lock type with a height of 0.93mm for mounting area, and can be applied to FPC/FFC thicknesses of 0.3mm.

6811

The 6811 Series possess enhanced robustness after implementing measures aimed at reducing breakage of connectors caused by human error. These low profile products feature a pitch of 0.5/1.0mm, bottom contact, front-lock type with a height of 1.28mm for mounting area, and can be applied to FPC/FFC thicknesses of 0.3mm.

6817

One-action type 6817 Series FPC/FFC connectors utilize a proprietary structure that enables quick, stable connections in a single insertion, removing a significant impediment to fully automated assembly. Since the actuator can be held open, it is possible to remove FPC/FFC with one hand, and it is also possible to mount the connector on a limited work space. 6817 Series connectors are space-saving: the vertical type that mounts perpendicular to the circuit board for vertical insertion is 5.32mm high on a PCB and 2.9mm wide, and the right-angle type mounting parallel to the board for horizontal insertion is 2.6mm high on a PCB and 5.9mm wide. This connectors were designed to work with the V-by-One®HS* transmission interface, which reaches speeds up to 3.75Gbps.

* "V-by-One" is registered trademarks of THine Electronics, Inc.

6824

The 6824 Series are FPC/FFC Connectors featuring a pitch of 0.4mm, height of 0.93mm, and width of 2.7mm developed for the internal connection of mobile equipment such as digital cameras, tablet PCs, smartphones, and game consoles. Despite their low-profile and space-saving features, there are fewer restrictions in FPC or PCB layouts due to dual-sided contacts.

6841

The 6841 Series are 0.3mm pitch, ZIF, vertical, slide-lock type FPC Connectors that are best suited for the internal connection of electric equipment requiring downsizing and multi-functions, such as notebook PCs, DSCs (Digital Still Cameras), DVCs (Digital Video Cameras), digital audio players, etc. These low profile, space-saving products feature a height of 3.6mm and width of 2.95mm (terminals are width of 2.8mm).

6844

The 6844 Series are light, compact FPC Connectors featuring a pitch of 0.3mm, height of 0.95mm on board, and width of 2.7mm* in the mounting space. *Width in actuator closed state:3.2mm
Despite their slim designs, these connectors feature accurate positioning for secure mating as well as good operability, and provide a nice “click” feeling in the locking system.

6866

The 6866 Series is low-profile and space-saving connectors with a fine pitch of 0.2mm, stacking height of 0.95mm on the board and width of 2.7mm*.*Width in actuator closed state:3.2mm
Featuring a bottom contact and front lock, these products can be applied to FPC thicknesses of 0.2mm. Furthermore, misalignments such as slanted insertions can be found visually by utilizing FPCs with tabs.

6882

The 6882 series has a dual-sided contact that enhances flexibility in pulling the FPC.
Although it is a backflip type, the FPC/FFC insertion port has been widely designed to improve workability.

8005

The 8005 Series are super compact, 2-pin Wire to Board Connectors designed for high-density mounting. These products are most suitable for miniaturization of hand-held devices such as mobile phones, notebook PCs, etc.

8040

The 8040 Series are super small, low profile Wire to Board Connectors featuring a pitch of 1.0mm and mating height of 1.4mm with two contacts to meet market needs for high-density packaging, especially in small mobile devices.

8041

The 8041 Series are super small and low-profile wire to board type connectors featuring a pitch of 0.9mm and mating height of 0.9mm which is one of the lowest in the industry (based on research by Kyocera Corporation; as of March 2017). These products were developed to meet market requirements for high- density packaging, especially designed for small mobile devices.

5650

The 5650 Series are plug connectors , compliant with the Slim Line SATA standards (Serial ATA Revision 3.0).

Slim Line SATA (Serial ATA): One of the extended specifications of IDE (ATA) standards for connections between PCs and storage devices, formulated by the Serial ATA Working Group.

6411

The 6411 Series are connectors compatible with the PCI-SIG, PCI Express^® M.2 specifications. Conventionally, different modules and connectors have been required to enhance each function of Wi-Fi, Bluetooth^R, SSD, Global Navigation Satellite Systems (GNSS), Near Field Communication (NFC), WiGig and WWAN (2G, 3G and 4G). The PCI Express^® M.2 specification supports multiple modules utilizing the same slot designed for each key. It corresponds to high-speed transmission such as PCIe (Gen.3), USB3.0, SATA3.0 and contributes to thinner and lighter notebook PCs and mobile PCs such as Ultrabook and tablet PCs. The 6411 Series are available in various heights and with different keying options for module cards.

PCI Express^® is a trademark or registered trademark of PCI-SIG.
Ultrabook^TM is a trademark or registered trademark of Intel Corporation.
Wi-Fi is a trademark or registered trademark of Wi-Fi Alliance.
Bluetooth^® is a trademark or registered trademark of Bluetooth SIG, Inc.

8069

The 8069 Series are small terminals called Shield Locks developed to fix shield cases used inside digital media. The use of Shield Locks simplifies the attachment of shield cases by allowing one-touch operation, which was conventionally carried out by manual soldering. In addition, the Shield Lock features a structure enabling disconnection, which greatly improves operability in part replacements and maintenance of shield cases.

CX2016DB

2016 Small Size 4 Pads Crystal Unit

CX2016SA

2016 Small Size, Wide Temperature Range(-40 to +150℃/ -40 to +125℃/ -30 to 85℃) 4 Pads Crystal Unit

KC2016Z

2016 Ultra Small Size Clock Oscillator

KC2520Z

2520　Size CMOS Output Type Clock Oscillators（SPXO）

KC3225Z

3225 Size CMOS Output Type Clock Oscillators（SPXO）

KC5032Z

5032 Size CMOS Output Type Clock Oscillators（SPXO）

KC7050Z

7050 Size CMOS Output Type Clock Oscillators（SPXO）

KC2520K

2520　Size CMOS Output Type Clock Oscillators（SPXO）

KC3225K

3225 Size CMOS Output Type Clock Oscillators（SPXO）

KC5032K

5032 Size CMOS Output Type Clock Oscillators（SPXO）

KC7050K

7050 Size CMOS Output Type Clock Oscillators（SPXO）

KGM

Kyocera standard type MLCC is ideal for use in a wide range of applications from consumer to industrial applications.

KGN

With unique circuit structure, this three terminal capacitor enables noise reduction in wide fequency range. With its high capacitance, it is possible to reduce the number of components being used.