5015

The 5015 Series are Board to Board Connectors which support the IEEE P1386 standard for mezzanine card installations in industrial computer applications including the VME bus, Future bus, CompactPCI bus and other host systems. These products are 1.0mm pitch, SMT connectors with 64 positions and stacking heights between 8 to 15mm.

5046

The 5046 Series are stacking heights range from 3.0mm to 4.5mm. These series feature Kyocera’s original receptacle contacts, realizing secure mating with a fine “click” feeling and high reliability. Designed for automatic mounting machines, packaged in tape and reel.

5047

The 5047 Series are Board to Board Connectors featuring a stacking height of 5.0mm/7.0mm.These series feature Kyocera’s original receptacle contacts, realizing secure mating with a fine “click” feeling and high reliability. Designed for automatic mounting machines, packaged in tape and reel.

5077

The 5077 Series feature an extended stacking height of 8.0mm-12.0mm.

5600

The 5600 Series are two-piece, SMT type Board to Board Connectors with a pitch of 0.8mm, designed for high-density applications such as CD-ROM I/O devices. We offer right angle types for the plug side and straight types for receptacles.

5655

5655 Series connectors feature a stacking height of just 4mm, and a proprietary floating structure optimized for high-speed data transmission.

5656

The 5656 series connectors with heat resistance up to +125°C and a proprietary floating mechanism that provides mating tolerance of ±1.0mm at maximum　in both the X and Y directions. This enhanced mating tolerance ensures reliable connections by compensating for a greater degree of location mating error and mounting slippage during assembly, as well as vibration and shock in the operating environment.

5689

The 5689 Series are Board to Board Connectors featuring a pitch of 0.635mm and a stacking height of 8.0mm.
These products are vertical (stacking) type connectors for connecting boards which are aligned in parallel directions.

5846

The 5846 Series are 0.4mm pitch, ideal for notePCs etc. These products have achieved a stacking height of 3.0mm and a width of 5.8mm including leads.

9072

The 9072 Series were developed for use in stacking boards and consist of headers and receptacles. The height between adjacent boards can be set at 12, 15, 18 or 20mm. These products, featuring receptacles with a bottom entry and kinked headers, are equipped with guides for preventing incorrect fitting.

6200

The 6200 Series is 1.0mm pitch, right angle ZIF connectors featuring a profile height of 2.9mm. Locks can be secured by opening or closing the retaining slider.

6208

The 6208 Series are 1.0mm pitch, ZIF, vertical FFC/FPC Connectors, which are available in both SMT and through hole types.

6210

The 6210 Series is ZIF, SMT type FPC/FFC Connectors with slide locks which enable secure connection with flexible cables. These low profile connectors feature a total height of 2.0mm.

6212

The 6212 Series is ZIF, SMT type FPC/FFC Connectors with slide locks which enable secure connection with flexible cables. These low profile connectors feature a total height of 2.0mm.

6214

The 6214 Series is 0.5mm pitch, ZIF, vertical, SMT type FFC/FPC Connectors with slide locks. Total heights is 4.1mm.

6224

The 6224 Series is 1.0mm pitch, right angle ZIF connectors featuring a profile height of 2.9mm.
Locks can be secured by opening or closing the retaining slider.

6227

The 6227 Series are 1.0mm pitch, Non-ZIF, right angle, SMT type FPC/FFC Connectors with tuning folk style, dual-sided contacts.
These products feature a low profile height of 2.0mm.

6232

The 6232 Series are 1.0mm pitch, Non-ZIF, SMT / through hole type FPC/FFC Connectors with cost advantages.
We offer both right angle and vertical connectors , but only bottom contacts are available in right angle versions.

6240

The 6240 Series are low profile, 0.5mm pitch, height of 2.0mm, ZIF, right angle, SMT, front-lock type FPC/FFC Connectors.

6244

The 6244 Series are 0.5mm pitch, Non-ZIF, vertical, SMT type FPC/FFC Connectors.

6251

The 6251 Series are suitable for applications in which high contact reliability is required under harsh environments regarding vibration, temperature, humidity, etc. Applications include in-vehicle units such as car navigation system units, GPS units, and car audio products, medical or industrial equipment, and OA or AV equipment. FPCs/FFCs with tabs prevent improper mating, enable secure connection, and increase the force to retain FPCs/FFCs. The FPCs/FFCs can be also be used in our right angle 6288 Series and vertical 6801 Series.

6260

The 6260 Series is ZIF, SMT type FPC/FFC Connectors with slide locks which enable secure connection with flexible cables.
These low profile connectors feature a total height of 2.0mm.

6262

The 6262 Series is ZIF, SMT type FPC/FFC Connectors with slide locks which enable secure connection with flexible cables.
These low profile connectors feature a total height of 2.0mm.

6274

The 6274 Series is 0.5mm pitch, ZIF, vertical, SMT type FFC/FPC Connectors with slide locks.

6288

The 6288 Series are FPC/FFC Connectors designed for applications such as GPSs and AV equipment for automobile use or electronics for industrial and/or medical use which require resistance to vibration. These products are 0.5mm/1.0mm pitch, bottom contact, right angle, SMT, ZIF connectors with front locking. Their structures prevent FPCs/FFCs from becoming disjointed or inserted aslant.

6801

The 6801 Series are suitable for applications in which high contact reliability is required under harsh environments regarding vibration, temperature, humidity, etc. Applications include in-vehicle units such as car navigation system units, GPS units, and car audio products, medical or industrial equipment, and OA or AV equipment. FPCs/FFCs with tabs prevent improper mating, enable secure connection, and increase the force to retain FPCs/FFCs. The FPCs/FFCs can be also be utilized in our right angle 6288 Series and vertical 6251 Series.

6806

The 6806 Series are FPC/FFC connectors for high-speed transmission featuring a pitch of 0.5mm and height of 1.75mm.
A convex-shaped actuator shape facilitates opening / closing operations, and a “click” feeling assures locking when the FPC/FFC is mated.
The contact point is designed widely in order to obtain high contact reliability with FPC/FFC conductors. In addition to FPCs, these connectors can also be used for impedance-adjustable FFCs. By improving high-frequency characteristics with impedance matching, the connectors allow high-speed transmission which corresponds to next-generation interfaces V-by-One^®HS^* . * V-by-One is a registered trademark of THine Electronics, Inc.

6809

The 6809 Series possess enhanced robustness after implementing measures aimed at reducing breakage of connectors caused by human error. These low profile products feature a pitch of 0.5mm, bottom contact, front-lock type with a height of 0.93mm for mounting area, and can be applied to FPC/FFC thicknesses of 0.3mm.

6810

One-action type 6810 Series connectors utilize a proprietary structure that enables quick, stable connections in a single insertion, removing a significant impediment to fully automated assembly. Specifically designed to support automated optical inspection (AOI) for high-speed quality assurance, these connectors offer a valuable opportunity to enhance productivity in electronics manufacturing. 6810 Series connectors are available in two configurations: a vertical type that mounts perpendicular to the circuit board for vertical insertion, and a right-angle type mounting parallel to the board for horizontal insertion.

6811

The 6811 Series possess enhanced robustness after implementing measures aimed at reducing breakage of connectors caused by human error. These low profile products feature a pitch of 0.5/1.0mm, bottom contact, front-lock type with a height of 1.28mm for mounting area, and can be applied to FPC/FFC thicknesses of 0.3mm.

6815

The 6815 Series is FPC/FFC connectors for high-speed transmission featuring a pitch of 0.5mm and height of 1.90mm. This Series optimizes high-speed data transmission for high definition images and features up to 100 pins which is the world’s highest^*1 pin count. The higher pin-count can reduce the total number of connectors required, allowing for space saving simplification of the circuit design and reducing the labor requirement for connector insertion and mounting. This connectors were designed to work with the V-by-One^®HS^*2 transmission interface, which reaches speeds up to 3.75Gbps.

*1 Based on research by Kyocera (as of March 1, 2019)

*2 "V-by-One" is registered trademarks of THine Electronics, Inc.

6817

One-action type 6817 Series FPC/FFC connectors utilize a proprietary structure that enables quick, stable connections in a single insertion, removing a significant impediment to fully automated assembly. Since the actuator can be held open, it is possible to remove FPC/FFC with one hand, and it is also possible to mount the connector on a limited work space. 6817 Series connectors are space-saving: the vertical type that mounts perpendicular to the circuit board for vertical insertion is 5.32mm high on a PCB and 2.9mm wide, and the right-angle type mounting parallel to the board for horizontal insertion is 2.6mm high on a PCB and 5.9mm wide. This connectors were designed to work with the V-by-One®HS* transmission interface, which reaches speeds up to 3.75Gbps.

* "V-by-One" is registered trademarks of THine Electronics, Inc.

6892

6892 Series connectors improved quality assurance (QA) checks - both visual and automated optical inspections (AOI) - to prevent misalignment.
This products feature heat resistance ranging from -40℃ to +125℃ and high-speed transmission capability that corresponds to V-by-One^® HS^*, the high-speed interfaces that reach up to 3.75Gbps

* “V-by-One” is registered trademarks of THine Electronics, Inc.

6882

The 6882 series has a dual-sided contact that enhances flexibility in pulling the FPC.
Although it is a backflip type, the FPC/FFC insertion port has been widely designed to improve workability.

8014

Metric type direct I/O connector with metal shell developed for use in vehicles and control operations of power and chemical plants featuring high density, high reliability, large capacity, and high maintainability.

8016

The 8016 Series are highly-reliable square-shaped I/O Rack and Panel Connectors using contacts developed by Kyocera of which plug and receptacle contacts are the same shape. The contacts feature a cross-shaped, four-face contact structure using a pair of balanced spring beams, thereby producing smooth multipoint contacts and wide wiping surfaces. Equipped with an actuating screw mechanism which ensures tight mating by turns of screws, as well as guide pins and sockets to provide orientation after fitting and prevent incorrect mating. Offered in the crimp, tab soldering, and wire wrapping types. In addition, connectors conforming to MIL are available.

8017

The 8017 Series are highly-reliable square-shaped I/O Rack and Panel Connectors using contacts developed by Kyocera of which plug and receptacle contacts are the same shape. The contacts feature a cross-shaped, four-face contact structure using a pair of balanced spring beams, thereby producing smooth multipoint contacts and wide wiping surfaces. Equipped with an actuating screw mechanism which ensures tight mating by turns of screws, as well as guide pins and sockets to provide orientation after fitting and prevent incorrect mating. Offered in the crimp, tab soldering, and wire wrapping types. In addition, connectors conforming to MIL are available.

8024

The 8024 / 8029 Series are high-current direct I/O connectors developed for use in control operations of power, chemical and steel plants. These are equipped with our original contacts and feature high-density, high reliability, large capacity, and high maintainability.

8027

The 8027 Series applies the hermaphroditic concept to insulators. These products are developed for use in high-current and high withstanding voltage circuits.

8029

The 8024 / 8029 Series are high-current direct I/O connectors developed for use in control operations of power, chemical and steel plants. These are equipped with our original contacts and feature high-density, high reliability, large capacity, and high maintainability.

8042

The 8042 Series are jumper-cable to board connectors developed for next-generation smart meters (power flow meters) for which demand has been rapidly increasing in recent years. Crimping or pressure welding is unnecessary, thus the assembling work is simplified by connecting stripped jumper cables directly. Both vertical and right angle types are available, which contribute to fewer restrictions in board layouts and/or laying jumper cables.

9021

A high-density, multi-purpose, versatile model developed by Kyocera to withstand severe operating environments under high temperature and humidity. These products newly feature a double-spring, multipoint contact which has resistance to atmospheric corrosion as well as a pliable spring characteristic with resistance to vibrations and shocks. Because of hermaphroditic metal to metal contacts, the connectors are free from plastic deformation and the dimensional accuracy is not affected, thus realizing long product life and high reliability. Overloads in insertion and draw outs are prevented with an anti-forcing design. These connectors have outstanding endurance.

8071

The 8071 Series, featuring a pitch of 2.0mm, are hard metric board to board connectors developed for high-speed signals and EMI protection in computers, large network servers and telecommunication equipment conforming to IEC61076-4-101. These connectors support the Compact-PCI Bus system, specified by PICMG (PCI Industrial Computer Manufacturers Group) as the standard bus for industrial board computers.
■AB Type The AB Type are connectors featuring 125 positions with the location guide optimized for high-density mounting and high pin counts in applications such as electric transmission systems. Specifications conform to the existing Multi-Line Module Connector series. In the A type (110 positions), multi-positioning has been achieved while maintaining the function of location guide by making the applied part of the coding key a signal line. Combining plugs from the 8071 Series and receptacles from the 8072 Series enable stacking type applications.

8072

The 8072 Series are horizontal plug connectors used with receptacle connectors from the 8071 Series in order to form extender cards. These connectors feature five rows and have the following variations: A type which are 110-line press-in connectors with coding keys, and B type which are press-in connectors featuring 95, 110, or 125 lines without coding keys. Vertical receptacles are also available in the 8072 Series.

8073

The 8073 Series are cable connectors designed to effectively catch signals emitted from the backplanes of connectors from the 8071 Series.. Shielded types for EMI / EMC control and non-shielded types are available.
Kyocera’s original design concept of stacking five-pin modules enables the expansion of pins in multiples of five. This structure also allows free combination of circuits in the field between the concentrating side and the branching side in multiples of five.
In addition, combining these connectors with our original two-cored coaxial cables designed for high-speed transmission enables simple arrangement of cables, thus resulting in the easy maintenance of equipment.

8261

The 8261 Series are EL-BIT connectors consisting of headers and receptacles which can be mated or unmated to establish or modify circuits very easily.

5650

The 5650 Series are plug connectors , compliant with the Slim Line SATA standards (Serial ATA Revision 3.0).

Slim Line SATA (Serial ATA): One of the extended specifications of IDE (ATA) standards for connections between PCs and storage devices, formulated by the Serial ATA Working Group.

6411

The 6411 Series are connectors compatible with the PCI-SIG, PCI Express^® M.2 specifications. Conventionally, different modules and connectors have been required to enhance each function of Wi-Fi, Bluetooth^R, SSD, Global Navigation Satellite Systems (GNSS), Near Field Communication (NFC), WiGig and WWAN (2G, 3G and 4G). The PCI Express^® M.2 specification supports multiple modules utilizing the same slot designed for each key. It corresponds to high-speed transmission such as PCIe (Gen.3), USB3.0, SATA3.0 and contributes to thinner and lighter notebook PCs and mobile PCs such as Ultrabook and tablet PCs. The 6411 Series are available in various heights and with different keying options for module cards.

PCI Express^® is a trademark or registered trademark of PCI-SIG.
Ultrabook^TM is a trademark or registered trademark of Intel Corporation.
Wi-Fi is a trademark or registered trademark of Wi-Fi Alliance.
Bluetooth^® is a trademark or registered trademark of Bluetooth SIG, Inc.

8069

The 8069 Series are small terminals called Shield Locks developed to fix shield cases used inside digital media. The use of Shield Locks simplifies the attachment of shield cases by allowing one-touch operation, which was conventionally carried out by manual soldering. In addition, the Shield Lock features a structure enabling disconnection, which greatly improves operability in part replacements and maintenance of shield cases.

9069

Press-fit terminal blocks are developed for power supply to PC boards and other individual units mounted in equipment. These products do not have thermal effects such as soldering.

CX2016DB

2016 Small Size 4 Pads Crystal Unit

CX2016SA

2016 Small Size, Wide Temperature Range(-40 to +150℃/ -40 to +125℃/ -30 to 85℃) 4 Pads Crystal Unit

KC2016Z

2016 Ultra Small Size Clock Oscillator

KC2520Z

2520　Size CMOS Output Type Clock Oscillators（SPXO）

KC3225Z

3225 Size CMOS Output Type Clock Oscillators（SPXO）

KC5032Z

5032 Size CMOS Output Type Clock Oscillators（SPXO）

KC7050Z

7050 Size CMOS Output Type Clock Oscillators（SPXO）

KC2016K

2016 Ultra Small Size Clock Oscillator

KC2520K

2520　Size CMOS Output Type Clock Oscillators（SPXO）

KC3225K

3225 Size CMOS Output Type Clock Oscillators（SPXO）

KC5032K

5032 Size CMOS Output Type Clock Oscillators（SPXO）

KC7050K

7050 Size CMOS Output Type Clock Oscillators（SPXO）

KT1612A

1612 Ultra Small Size TCXO (for GPS)

KT2016K

2016 Ultra Small Size TCXO (for GPS)

KT2520K

2520 Ultra Small Size TCXO (for GPS)

KT5032F

5032 Size TCXO(For Smallcell/Statum3)

KT7050A

7050 Size TCXO(For Smallcell/Statum3)10Pads

KT7050B

7050 Size TCXO(For Smallcell/Statum3)4Pads

KGM

Kyocera standard type MLCC is ideal for use in a wide range of applications from consumer to industrial applications.

Axial (Rectifier Diodes)

EC (Rectifier Diodes)

EP (Rectifier Diodes)

MC (Rectifier Diodes)

ME (Rectifier Diodes)

MP (Rectifier Diodes)

NS (Rectifier Diodes)

TO-220F 2pin (Rectifier Diodes)

Axial (FRD)

D-pak (FRD)

EC (FRD)

EP (FRD)

LPTO-263 (FRD)

MC (FRD)

ME (FRD)

MP (FRD)

NS (FRD)

TO-220 (FRD)

TO-220 2pin (FRD)

TO-220F (FRD)

TO-220F 2pin (FRD)

TO-247 (FRD)

TO-247 2pin (FRD)

TO-247L (FRD)

TO-247L 2Pin (FRD)

TO-251 (FRD)

TO-262 (FRD)

TO-263 (FRD)

VC (FRD)

VS (FRD)

LPTO-263 (SBD)

Axial (SBD)

D-pak (SBD)

EC (SBD)

EP (SBD)

MC (SBD)

ME (SBD)

MP (SBD)

NA (SBD)

NB (SBD)

NS (SBD)

TO-220 (SBD)

TO-220F (SBD)

TO-247 (SBD)

TO-247 2pin (SBD)

TO-251 (SBD)

TO-262 (SBD)

TO-263 (SBD)

VS (SBD)

MA (SBD)

PD

PE

PF

PR

PT

PH

PC

MR

P2H-F

P2H-Q

PC-F

PD-F

PAH

PGH

PHT

PDT

PAT

PDH

PCH

PFT

PKH

PJA

PA

PAB