5077

The 5077 Series feature an extended stacking height of 8.0mm-12.0mm.

6200

The 6200 Series is 1.0mm pitch, right angle ZIF connectors featuring a profile height of 2.9mm. Locks can be secured by opening or closing the retaining slider.

6224

The 6224 Series is 1.0mm pitch, right angle ZIF connectors featuring a profile height of 2.9mm.
Locks can be secured by opening or closing the retaining slider.

6232

The 6232 Series are 1.0mm pitch, Non-ZIF, SMT / through hole type FPC/FFC Connectors with cost advantages.
We offer both right angle and vertical connectors , but only bottom contacts are available in right angle versions.

6288

The 6288 Series are FPC/FFC Connectors designed for applications such as GPSs and AV equipment for automobile use or electronics for industrial and/or medical use which require resistance to vibration. These products are 0.5mm/1.0mm pitch, bottom contact, right angle, SMT, ZIF connectors with front locking. Their structures prevent FPCs/FFCs from becoming disjointed or inserted aslant.

6806

The 6806 Series are FPC/FFC connectors for high-speed transmission featuring a pitch of 0.5mm and height of 1.75mm.
A convex-shaped actuator shape facilitates opening / closing operations, and a “click” feeling assures locking when the FPC/FFC is mated.
The contact point is designed widely in order to obtain high contact reliability with FPC/FFC conductors. In addition to FPCs, these connectors can also be used for impedance-adjustable FFCs. By improving high-frequency characteristics with impedance matching, the connectors allow high-speed transmission which corresponds to next-generation interfaces V-by-One^®HS^* . * V-by-One is a registered trademark of THine Electronics, Inc.

6809

The 6809 Series possess enhanced robustness after implementing measures aimed at reducing breakage of connectors caused by human error. These low profile products feature a pitch of 0.5mm, bottom contact, front-lock type with a height of 0.93mm for mounting area, and can be applied to FPC/FFC thicknesses of 0.3mm.

6811

The 6811 Series possess enhanced robustness after implementing measures aimed at reducing breakage of connectors caused by human error. These low profile products feature a pitch of 0.5/1.0mm, bottom contact, front-lock type with a height of 1.28mm for mounting area, and can be applied to FPC/FFC thicknesses of 0.3mm.

6815

The 6815 Series is FPC/FFC connectors for high-speed transmission featuring a pitch of 0.5mm and height of 1.90mm. This Series optimizes high-speed data transmission for high definition images and features up to 100 pins which is the world’s highest^*1 pin count. The higher pin-count can reduce the total number of connectors required, allowing for space saving simplification of the circuit design and reducing the labor requirement for connector insertion and mounting. This connectors were designed to work with the V-by-One^®HS^*2 transmission interface, which reaches speeds up to 3.75Gbps.

*1 Based on research by Kyocera (as of March 1, 2019)

*2 "V-by-One" is registered trademarks of THine Electronics, Inc.

6817

One-action type 6817 Series FPC/FFC connectors utilize a proprietary structure that enables quick, stable connections in a single insertion, removing a significant impediment to fully automated assembly. Since the actuator can be held open, it is possible to remove FPC/FFC with one hand, and it is also possible to mount the connector on a limited work space. 6817 Series connectors are space-saving: the vertical type that mounts perpendicular to the circuit board for vertical insertion is 5.32mm high on a PCB and 2.9mm wide, and the right-angle type mounting parallel to the board for horizontal insertion is 2.6mm high on a PCB and 5.9mm wide. This connectors were designed to work with the V-by-One®HS* transmission interface, which reaches speeds up to 3.75Gbps.

* "V-by-One" is registered trademarks of THine Electronics, Inc.

8042

The 8042 Series are jumper-cable to board connectors developed for next-generation smart meters (power flow meters) for which demand has been rapidly increasing in recent years. Crimping or pressure welding is unnecessary, thus the assembling work is simplified by connecting stripped jumper cables directly. Both vertical and right angle types are available, which contribute to fewer restrictions in board layouts and/or laying jumper cables.

8261

The 8261 Series are EL-BIT connectors consisting of headers and receptacles which can be mated or unmated to establish or modify circuits very easily.

KGM

Kyocera standard type MLCC is ideal for use in a wide range of applications from consumer to industrial applications.

KGT

By maintaining excellent characteristics of ceramics, this thin design MLCC is a superb solution in applications where low profile is in need.

KGN

With unique circuit structure, this three terminal capacitor enables noise reduction in wide fequency range. With its high capacitance, it is possible to reduce the number of components being used.