Test Items	Conditions
Preconditioning	1) Temperature cycling: -40℃ to 60℃, 5 cycles 2) Baking: 125±5℃, 24 hrs 3) Moisture soak: soak time and conditions per IPC/JEDEC J-STD-020 based on device MSL level 4) Reflow: 3 reflow cycles using recommendable reflow profile 5) Drying: room ambient temperature *Examination conducted per individual product
Temperature Cycling	After preconditioning, subject the device to 700 cycles (1 Cycle: -55℃ for 30 min, then +125℃ for 30 min) *Examination conducted per individual product After the test, the product was left at room temperature for at least 2 hours to check electrical characteristics and specifications.
ESD (Charged Device Model)	Complies with JESD22-C101
ESD (Human Body Model)	Complies with EIA/JESD22-A114
High Temperature Storage Life	Subject the device to 150+/-2℃ for 1,000 hrs *Examination conducted per individual product After the test, the product was left at room temperature for at least 2 hours to check electrical characteristics and specifications.
High Temperature and Humidity Storage Life	After preconditioning, subject the device to 85+/-2℃ and 85%RH for 1,000 hrs *Examination conducted per individual product After the test, the product was left at room temperature for at least 2 hours to check electrical characteristics and specifications.
Un-biased Temperature and Humidity	After preconditioning, subject the device to 130+/-2℃ and 85%RH for 96 hrs *Examination conducted per individual product After the test, the product was left at room temperature for at least 2 hours to check electrical characteristics and specifications.
Vibration (Variable Frequency)	20Hz to 2kHz (log variation) in 4 min or over, 4X in each orientation, 50g peak acceleration, to test electrical characteristics and specifications.
Solderability	Print lead-free solder paste on the terminal pattern of the device. Subject the device to recommendable reflow soldering. More than 90% of the terminal area shall be covered with solder to avoid abnormal appearance.