SF25-1950R9UUA1 2.Production

Size 2.5 x 2.0 mm SAW Filter for base stations

Distributor Inventory
Application
- Base Station
Specifications
BAND |
1Rx |
---|---|
Size | 2.5 x 2.0mm |
Type |
Unbalanced Type |
Height (Max.) | 0.90mm |
Operating Temperature Range | -40℃ ~ 105℃ |
Packaging Style | Reel |
Quantity per Package | 3,000 |
Packaging Specifications
Packaging Style | Reel |
---|---|
Quantity per Package | 3,000 |
Engineering Documents
Characteristic Data
Environmental data
RoHS Compliance | Yes |
---|
FAQ
View All- Dry the packed and taped products one time for 10±1 hours at 60±2℃ and 10% RH or less.
- Put the products in a heat-resistant container and dry it one time for 10±1 hours at 60±2℃ and 10% RH or less, for 8±1 hours at 70±2℃ and 10% RH or less, or for 6±1 hours at 80±2℃ and 10% RH or less.
- Not opened damp proof packing:Please store them under the normal temperature and humidity (-10 to +40℃ and 30 to 85% RH). As for products that have been stored over one year since they were shipped, their solderability could be deteriorated, so please be sure to evaluate their solderability before use them.
- Unpacked damp proof packing: After opening, please make sure to mount them within 168 hours in an environment of 5 to 30℃ and 60% RH or less.
The MSL is 3 for all Kyocera SAW device products. (Needed damp proof packing)
We recommend up to three times.
When soldering, please use a spot heater under the following conditions:
・Preheating: 150℃ +/- 10℃ for 60 seconds at minimum
・Warm air temperature: 280℃ +/- 10℃ for 30 seconds at maximum
Related Glossary
View AllElectronic component which applies surface acoustic waves. Band pass filters, high pass filters, band eliminating filters, and duplexers are included in this category.
Related Products SAW Filters
The opposition to current flow in a circuit, including resistance, inductance, and capacitance.
Signal division between Tx (Transmit) and Rx (Receive).