5804

The 5804 Series are 0.4mm pitch, ultra low profile Board to Board Connectors featuring a stacking height of 0.9mm/1.5mm/2.0mm. These products were developed to meet market needs for miniaturization of Smartphone, mobile phones, digital AV equipment, etc. Space saving is greatly achieved with a width of 2.4mm.

5806

The 5806 Series are Board to Board Connectors with a fine pitch of 0.4mm and an ultra-low stacking height of 0.6mm. These products feature the width of 1.9mm on the short side, which contributes to downsizing in small electronic equipment.

5843

The 5843 Series are Board to Board Connectors with a pitch of 0.35mm, which is reduced by 0.05mm compared with our conventional products. In addition, these series have space-saving features with a stacking height of 0.8mm/1.0mm/1.5mm and width of 2.4mm. The bottoms of the connectors are insulated and avoid exposure of contacts, thus enabling flexible designs on printed circuit boards.

5861

The 5861 Series are space-saving Board to Board Connectors featuring a fine pitch of 0.35mm, stacking height of 0.6mm (between boards) and a width of 1.95mm. With the metals covering both ends, the connector, with narrow pitches and low profile though, realizes the structurally high robustness and smooth guiding function for mating to prevent breakage of the insulator housing and contact caused by misaligned mating. The metals at both ends of which rated current is 5.0A/metal tab enable to carry a large current.

5863

The 5863 Series are space-saving Board to Board Connectors featuring a fine pitch of 0.35mm, stacking height of 0.8mm (between boards) and a width of 2.3mm. With the metals covering both ends, the connector, with narrow pitches and low profile though, realizes the structurally high robustness and smooth guiding function for mating to prevent breakage of the insulator housing and contact caused by misaligned mating. The metals at both ends of which rated current is 5.0A/metal tab enable to carry a large current.

5897

The 5897 Series are space-saving Board to Board Connectors featuring a fine pitch of 0.35mm, stacking height of 0.8mm (between boards) and a width of 2.3mm. In addition to its narrow pitches and low profile as with the conventional products containing the robust metals, the metal fittings covering both ends prevent breakage of the insulator housing and contacts due to misalignment in their mating. Thus it is a connector that realizes high robustness and smooth guide into mating. Besides the above, metal fittings are also provided inside the receptacle connector to increase the strength of the connector.The metals at both ends of which rated current is 3.0A/metal tab enable to carry a large current.

7129

The 7129 Series is board to board connector which is capable of conducting high current up to 10A . Although it is a space-saving product with 0.7mm stacking height and a 2.2mm in width, it achieves high robustness and smooth mating by attaching metals on both side-ends to prevent damage to insulator housings and contacts due to mating in a misaligned way.

6277

The 6277 Series are 0.5mm pitch, ZIF, right angle FPC Connectors with dual-sided contacts.
These connectors feature a low profile height of 0.9mm and are applied in LCDs for small portable equipment.

6293

The 6293 Series are low profile, space-saving FPC Connectors which feature a pitch of 0.3mm, height of 0.9mm, and width of 3.55mm^* for mounting areas.*Width in actuator closed state:3.9mm
These products are dual-sided contact, LIF, right angle, SMT type connectors.

6298

The 6298 Series are low profile connectors specially designed for LCD modules with back-light requirements. These products are 0.5mm pitch, bottom contact, ZIF, right angle, SMT, back-lock type connectors with heights of 0.9mm. FPCs with notches ensure accurate insertion into the connectors.

6844

The 6844 Series are light, compact FPC Connectors featuring a pitch of 0.3mm, height of 0.95mm on board, and width of 2.7mm* in the mounting space. *Width in actuator closed state:3.2mm
Despite their slim designs, these connectors feature accurate positioning for secure mating as well as good operability, and provide a nice “click” feeling in the locking system.

6866

The 6866 Series is low-profile and space-saving connectors with a fine pitch of 0.2mm, stacking height of 0.95mm on the board and width of 2.7mm*.*Width in actuator closed state:3.2mm
Featuring a bottom contact and front lock, these products can be applied to FPC thicknesses of 0.2mm. Furthermore, misalignments such as slanted insertions can be found visually by utilizing FPCs with tabs.

8005

The 8005 Series are super compact, 2-pin Wire to Board Connectors designed for high-density mounting. These products are most suitable for miniaturization of hand-held devices such as mobile phones, notebook PCs, etc.

8040

The 8040 Series are super small, low profile Wire to Board Connectors featuring a pitch of 1.0mm and mating height of 1.4mm with two contacts to meet market needs for high-density packaging, especially in small mobile devices.

8041

The 8041 Series are super small and low-profile wire to board type connectors featuring a pitch of 0.9mm and mating height of 0.9mm which is one of the lowest in the industry (based on research by Kyocera Corporation; as of March 2017). These products were developed to meet market requirements for high- density packaging, especially designed for small mobile devices.

CT2016DB

2016 Ultra Small Size Crystal Unit with Thermistor

CX1008SB

1008 Small Size and Low Profile Crystal Unit

CX1210DB

1210 Small Size and Low Profile Crystal Unit

CX1210SB

1210 Small Size and Low Profile Crystal Unit

CX1612DB

1612 Small Size and Low Profile Crystal Unit

CX2016DB

2016 Small Size 4 Pads Crystal Unit

CX2016SA

2016 Small Size, Wide Temperature Range(-40 to +150℃/ -40 to +125℃/ -30 to 85℃) 4 Pads Crystal Unit

CT1612RB

1612 Ultra Small Size Crystal Unit with Thermistor

KC2016Z

2016 Ultra Small Size Clock Oscillator

KC2520Z

2520　Size CMOS Output Type Clock Oscillators（SPXO）

KC3225Z

3225 Size CMOS Output Type Clock Oscillators（SPXO）

KC5032Z

5032 Size CMOS Output Type Clock Oscillators（SPXO）

KC7050Z

7050 Size CMOS Output Type Clock Oscillators（SPXO）

KC2520K

2520　Size CMOS Output Type Clock Oscillators（SPXO）

KC3225K

3225 Size CMOS Output Type Clock Oscillators（SPXO）

KC5032K

5032 Size CMOS Output Type Clock Oscillators（SPXO）

KC7050K

7050 Size CMOS Output Type Clock Oscillators（SPXO）

KT1612A

1612 Ultra Small Size TCXO (for GPS)

KT2016K

2016 Ultra Small Size TCXO (for GPS)

KT2520K

2520 Ultra Small Size TCXO (for GPS)

KT1612A (Low Phase Noise)

1612 Ultra Small Size TCXO (Low Phase Noise type)

SF11

SF14

SF15

SF16

SF18

SD16

SD18

SQ25

KGM

Kyocera standard type MLCC is ideal for use in a wide range of applications from consumer to industrial applications.

KGT

By maintaining excellent characteristics of ceramics, this thin design MLCC is a superb solution in applications where low profile is in need.

KGN

With unique circuit structure, this three terminal capacitor enables noise reduction in wide fequency range. With its high capacitance, it is possible to reduce the number of components being used.