5015

The 5015 Series are Board to Board Connectors which support the IEEE P1386 standard for mezzanine card installations in industrial computer applications including the VME bus, Future bus, CompactPCI bus and other host systems. These products are 1.0mm pitch, SMT connectors with 64 positions and stacking heights between 8 to 15mm.

5077

The 5077 Series feature an extended stacking height of 8.0mm-12.0mm.

5600

The 5600 Series are two-piece, SMT type Board to Board Connectors with a pitch of 0.8mm, designed for high-density applications such as CD-ROM I/O devices. We offer right angle types for the plug side and straight types for receptacles.

5689

The 5689 Series are Board to Board Connectors featuring a pitch of 0.635mm and a stacking height of 8.0mm. These products are vertical (stacking) type connectors for connecting boards which are aligned in parallel directions.

5690

The 5690 Series are Board to Board Connectors featuring a pitch of 0.635mm. Plug connectors are of the vertical (stacking) type, and receptacle connectors are offered in two types depending on the combination with plug connectors: vertical (stacking) type for connecting boards which are aligned in parallel directions, and right angle type for connecting boards in vertical directions. The floating structure of the plug connector has a movable range of ±0.5mm in the X and Y directions, thus improving contact reliability against misalignments in mating or vibrations. Furthermore, Kyocera’s proprietary contact structure removes foreign matter with concentrated load (wiping effect), thus realizing high contact reliability. These products can withstand high temperatures up to 125°C and are ideal for automotive equipment such as car navigation systems and millimeter-wave radars.

5846

The 5846 Series are 0.4mm pitch, ideal for notePCs etc. These products have achieved a stacking height of 3.0mm and a width of 5.8mm including leads.

9072

The 9072 Series were developed for use in stacking boards and consist of headers and receptacles. The height between adjacent boards can be set at 12, 15, 18 or 20mm. These products, featuring receptacles with a bottom entry and kinked headers, are equipped with guides for preventing incorrect fitting.

6200

The 6200 Series is 1.0mm pitch, right angle ZIF connectors featuring a profile height of 2.9mm. Locks can be secured by opening or closing the retaining slider.

6208

The 6208 Series are 1.0mm pitch, ZIF, vertical FFC/FPC Connectors, which are available in both SMT and through hole types. The SMT type can be packed with tape and reel for automatic mounting.

6210

The 6210 Series is ZIF, SMT type FPC/FFC Connectors with slide locks which enable secure connection with flexible cables. These low profile connectors feature a total height of 2.0mm.

6212

The 6212 Series is ZIF, SMT type FPC/FFC Connectors with slide locks which enable secure connection with flexible cables. These low profile connectors feature a total height of 2.0mm.

6214

The 6214 Series is 0.5mm pitch, ZIF, vertical, SMT type FFC/FPC Connectors with slide locks. Total heights is 4.1mm.

6224

The 6224 Series is 1.0mm pitch, right angle ZIF connectors featuring a profile height of 2.9mm. Locks can be secured by opening or closing the retaining slider.

6227

The 6227 Series are 1.0mm pitch, Non-ZIF, right angle, SMT type FPC/FFC Connectors with tuning folk style, dual-sided contacts. These products feature a low profile height of 2.0mm.

6232

The 6232 Series are 1.0mm pitch, Non-ZIF, SMT / through hole type FPC/FFC Connectors with cost advantages. The SMT type is a right angle connector (top or bottom contact) or vertical connector which can be packed in tape and reel for automatic mounting. We offer both right angle and vertical connectors for through hole types, but only bottom contacts are available in right angle versions.

6244

The 6244 Series are 0.5mm pitch, Non-ZIF, vertical, SMT type FPC/FFC Connectors. These products are designed for automatic mounting machines, packaged in tape and reel.

6251

The 6251 Series are suitable for applications in which high contact reliability is required under harsh environments regarding vibration, temperature, humidity, etc. Applications include in-vehicle units such as car navigation system units, GPS units, and car audio products, medical or industrial equipment, and OA or AV equipment. FPCs/FFCs with tabs prevent improper mating, enable secure connection, and increase the force to retain FPCs/FFCs. The FPCs/FFCs can be also be used in our right angle 6288 Series and vertical 6801 Series.

6260

The 6260 Series is ZIF, SMT type FPC/FFC Connectors with slide locks which enable secure connection with flexible cables. These low profile connectors feature a total height of 2.0mm.

6262

The 6262 Series is ZIF, SMT type FPC/FFC Connectors with slide locks which enable secure connection with flexible cables. These low profile connectors feature a total height of 2.0mm.

6274

The 6274 Series is 0.5mm pitch, ZIF, vertical, SMT type FFC/FPC Connectors with slide locks.

6288

The 6288 Series are FPC/FFC Connectors designed for applications such as GPSs and AV equipment for automobile use or electronics for industrial and/or medical use which require resistance to vibration. These products are 0.5m pitch, bottom contact, right angle, SMT, ZIF connectors with front locking. Their structures prevent FPCs/FFCs from becoming disjointed or inserted aslant. We also offer 1mm pitch type.

6801

The 6801 Series are suitable for applications in which high contact reliability is required under harsh environments regarding vibration, temperature, humidity, etc. Applications include in-vehicle units such as car navigation system units, GPS units, and car audio products, medical or industrial equipment, and OA or AV equipment. FPCs/FFCs with tabs prevent improper mating, enable secure connection, and increase the force to retain FPCs/FFCs. The FPCs/FFCs can be also be utilized in our right angle 6288 Series and vertical 6251 Series.

6810

One-touch locking 6810 Series connectors utilize a proprietary structure that enables quick, stable connections in a single insertion, removing a significant impediment to fully automated assembly. Specifically designed to support automated optical inspection (AOI) for high-speed quality assurance, these connectors offer a valuable opportunity to enhance productivity in electronics manufacturing. 6810 Series connectors are available in two configurations: a vertical type that mounts perpendicular to the circuit board for vertical insertion, and a right-angle type mounting parallel to the board for horizontal insertion.

6892

6892 Series connectors improved quality assurance (QA) checks - both visual and automated optical inspections (AOI) - to prevent misalignment.
This products feature heat resistance ranging from -40℃ to +125℃ and high-speed transmission capability that corresponds to V-by-One^® HS^*, the high-speed interfaces that reach up to 3.75Gbps

* “V-by-One” is registered trademarks of THine Electronics, Inc.

8014

Metric type direct I/O connector with metal shell developed for use in vehicles and control operations of power and chemical plants featuring high density, high reliability, large capacity, and high maintainability.

8016

The 8016 Series are highly-reliable square-shaped I/O Rack and Panel Connectors using contacts developed by Kyocera of which plug and receptacle contacts are the same shape. The contacts feature a cross-shaped, four-face contact structure using a pair of balanced spring beams, thereby producing smooth multipoint contacts and wide wiping surfaces. Equipped with an actuating screw mechanism which ensures tight mating by turns of screws, as well as guide pins and sockets to provide orientation after fitting and prevent incorrect mating. Offered in the crimp, tab soldering, and wire wrapping types. In addition, connectors conforming to MIL are available.

8017

The 8017 Series are highly-reliable square-shaped I/O Rack and Panel Connectors using contacts developed by Kyocera of which plug and receptacle contacts are the same shape. The contacts feature a cross-shaped, four-face contact structure using a pair of balanced spring beams, thereby producing smooth multipoint contacts and wide wiping surfaces. Equipped with an actuating screw mechanism which ensures tight mating by turns of screws, as well as guide pins and sockets to provide orientation after fitting and prevent incorrect mating. Offered in the crimp, tab soldering, and wire wrapping types. In addition, connectors conforming to MIL are available.

8024

The 8024 / 8029 Series are high-current direct I/O connectors developed for use in control operations of power, chemical and steel plants. These are equipped with our original contacts and feature high-density, high reliability, large capacity, and high maintainability.

8027

The 8027 Series applies the hermaphroditic concept to insulators. These products are developed for use in high-current and high withstanding voltage circuits.

8029

The 8024 / 8029 Series are high-current direct I/O connectors developed for use in control operations of power, chemical and steel plants. These are equipped with our original contacts and feature high-density, high reliability, large capacity, and high maintainability.

8042

The 8042 Series are jumper-cable to board connectors developed for next-generation smart meters (power flow meters) for which demand has been rapidly increasing in recent years. Crimping or pressure welding is unnecessary, thus the assembling work is simplified by connecting stripped jumper cables directly. Both vertical and right angle types are available, which contribute to fewer restrictions in board layouts and/or laying jumper cables.

8263

The 8263 Series are 2.5mm pitch, tin-plated connectors of vertical and right angle types. The contact point between the receptacle and plug pins features a 6-point contact structure which prevents fretting corrosion.

8283

The 8283 Series are 2.0mm pitch, tin-plated connectors of vertical and right angle types. The contact point between the receptacle and plug pins features a highly reliable multi-contact structure which prevents fretting corrosion.

9021

A high-density, multi-purpose, versatile model developed by Kyocera to withstand severe operating environments under high temperature and humidity. These products newly feature a double-spring, multipoint contact which has resistance to atmospheric corrosion as well as a pliable spring characteristic with resistance to vibrations and shocks. Because of hermaphroditic metal to metal contacts, the connectors are free from plastic deformation and the dimensional accuracy is not affected, thus realizing long product life and high reliability. Overloads in insertion and draw outs are prevented with an anti-forcing design. These connectors have outstanding endurance.

8071

The 8071 Series, featuring a pitch of 2.0mm, are hard metric board to board connectors developed for high-speed signals and EMI protection in computers, large network servers and telecommunication equipment conforming to IEC61076-4-101. These connectors support the Compact-PCI Bus system, specified by PICMG (PCI Industrial Computer Manufacturers Group) as the standard bus for industrial board computers.
■AB Type The AB Type are connectors featuring 125 positions with the location guide optimized for high-density mounting and high pin counts in applications such as electric transmission systems. Specifications conform to the existing Multi-Line Module Connector series. In the A type (110 positions), multi-positioning has been achieved while maintaining the function of location guide by making the applied part of the coding key a signal line. Combining plugs from the 8071 Series and receptacles from the 8072 Series enable stacking type applications.

8072

The 8072 Series are horizontal plug connectors used with receptacle connectors from the 8071 Series in order to form extender cards. These connectors feature five rows and have the following variations: A type which are 110-line press-in connectors with coding keys, and B type which are press-in connectors featuring 95, 110, or 125 lines without coding keys. Vertical receptacles are also available in the 8072 Series.

8073

The 8073 Series are cable connectors designed to effectively catch signals emitted from the backplanes of connectors from the 8071 Series.. Shielded types for EMI / EMC control and non-shielded types are available.
Kyocera’s original design concept of stacking five-pin modules enables the expansion of pins in multiples of five. This structure also allows free combination of circuits in the field between the concentrating side and the branching side in multiples of five.
In addition, combining these connectors with our original two-cored coaxial cables designed for high-speed transmission enables simple arrangement of cables, thus resulting in the easy maintenance of equipment.

8261

The 8261 Series are EL-BIT connectors consisting of headers and receptacles which can be mated or unmated to establish or modify circuits very easily.

5650

The 5650 Series are plug connectors , compliant with the Slim Line SATA standards (Serial ATA Revision 3.0).

Slim Line SATA (Serial ATA): One of the extended specifications of IDE (ATA) standards for connections between PCs and storage devices, formulated by the Serial ATA Working Group.

6406

The 6406 Series are 0.6mm pitch, 200 positions, SMT type DDR-S.O. DIMM Connectors conforming to the JEDEC MO-224 standard, which were developed based on market needs for memories with high speed and large capacity. Adopting the vertical type realizes space-saving, thus enabling other components to be mounted on the adjacent area.

6407

The 6407 Series is designed for miniature expansion card using wireless LAN, Wired LAN and WAN, it conforms to the PCI Express Mini Card Electromechanical SPEC (Mini-PCI Standard) provided by PCI-SIG alliance. We have normal direction (Top mount) type with H=3.75mm or 5.75mm, reverse direction (bottom mount) type with H=3.1mm, and reverse gull wing (mid mount) type which realize H=2.13mm very low profile by cutting into the printed circuit board.

6409

The 6409 Series are connectors for DDR3 and DDR2 S.O. DIMM cards, which are compliant to JEDEC MO-268 and MO-224 standards. These products are 0.6mm pitch, SMT and vertical type connectors available with 204 positions (1.5V for DDR3) or 200 positions (1.8V for DDR2). Memory card boards can be securely fixed in the connectors due to arms on both ends which are raised by levers and fix the card boards when inserted. Suitable for various applications such as multifunction peripherals, printers, scanners, POS system terminals, etc.

6411

The 6411 Series are connectors compatible with the PCI-SIG, PCI Express^® M.2 specifications. Conventionally, different modules and connectors have been required to enhance each function of Wi-Fi, Bluetooth^R, SSD, Global Navigation Satellite Systems (GNSS), Near Field Communication (NFC), WiGig and WWAN (2G, 3G and 4G). The PCI Express^® M.2 specification supports multiple modules utilizing the same slot designed for each key. It corresponds to high-speed transmission such as PCIe (Gen.3), USB3.0, SATA3.0 and contributes to thinner and lighter notebook PCs and mobile PCs such as Ultrabook and tablet PCs. The 6411 Series are available in various heights and with different keying options for module cards.

PCI Express^® is a trademark or registered trademark of PCI-SIG.
Ultrabook^TM is a trademark or registered trademark of Intel Corporation.
Wi-Fi is a trademark or registered trademark of Wi-Fi Alliance.
Bluetooth^® is a trademark or registered trademark of Bluetooth SIG, Inc.

8069

The 8069 Series are small terminals called Shield Locks developed to fix shield cases used inside digital media. The use of Shield Locks simplifies the attachment of shield cases by allowing one-touch operation, which was conventionally carried out by manual soldering. In addition, the Shield Lock features a structure enabling disconnection, which greatly improves operability in part replacements and maintenance of shield cases.

9069

Press-fit terminal blocks are developed for power supply to PC boards and other individual units mounted in equipment. These products do not have thermal effects such as soldering.

5638

The 5638 Series are SDMC (Secure Digital Memory Card) Connectors used as the recording medium of portable devices, which can be widely introduced into the market of notebook PCs, mobile phones, DVCs (Digital Video Cameras), DSCs (Digital Still Cameras) and other complex machines for these applications.

5036

The 5036 Series are connectors designed for SIM cards that conform to the GSM standards (11. 11). They are designed for automatic mounting machines, packaged in tape and reel.

KC2520K

2520　Size CMOS Output Type Clock Oscillators（SPXO）

KC3225K

3225 Size CMOS Output Type Clock Oscillators（SPXO）

KC5032K

5032 Size CMOS Output Type Clock Oscillators（SPXO）

KC7050K

7050 Size CMOS Output Type Clock Oscillators（SPXO）

CM

Kyocera standard type MLCC is ideal for use in a wide range of applications from consumer to industrial applications.

Axial (Rectifier Diodes)

EC (Rectifier Diodes)

EP (Rectifier Diodes)

MC (Rectifier Diodes)

ME (Rectifier Diodes)

MP (Rectifier Diodes)

NS (Rectifier Diodes)

TO-220F 2pin (Rectifier Diodes)

Axial (FRD)

D-pak (FRD)

EC (FRD)

EP (FRD)

LPTO-263 (FRD)

MC (FRD)

ME (FRD)

MP (FRD)

NS (FRD)

TO-220 (FRD)

TO-220 2pin (FRD)

TO-220F (FRD)

TO-220F 2pin (FRD)

TO-247 (FRD)

TO-247 2pin (FRD)

TO-247L (FRD)

TO-247L 2Pin (FRD)

TO-251 (FRD)

TO-262 (FRD)

TO-263 (FRD)

VC (FRD)

VS (FRD)

LPTO-263 (SBD)

Axial (SBD)

D-pak (SBD)

EC (SBD)

EP (SBD)

MC (SBD)

ME (SBD)

MP (SBD)

NA (SBD)

NB (SBD)

NS (SBD)

TO-220 (SBD)

TO-220F (SBD)

TO-247 (SBD)

TO-247 2pin (SBD)

TO-251 (SBD)

TO-262 (SBD)

TO-263 (SBD)

VS (SBD)

MA (SBD)

PD

PE

PF

PR

PT

PH

PC

MR

P2H-F

P2H-Q

PC-F

PD-F

PAH

PGH

PHT

PDT

PAT

PDH

PCH

PFT

PKH

PJA

PA

PAB