MPP5DA40

General rectifier diodes are diodes with PN junctions that rectifiy alternating currents with a commercial frequency (50Hz/60Hz) . They are also used as diodes to protect the power supply from reverse connection or reverse current.

Send by Email

Application

Power supplies
Industrial equipment

Production status

Distributor Inventory

Distributor	Part Number	Uploaded	Country / Region	Quantity	Buy

Distributor	Part Number	Uploaded	Country / Region	Quantity
Distributor	Buy

Please check the website of each agency for the latest information.

Production Status

2.Production

Packaging Specifications

Packaging style	Reel
Quantity per Package	3000
Weight	0.012g

Environmental data

RoHS Compliance	Yes

RoHS_Diode_MP.pdf (168.82KB)

TSCA_Diode_MP.pdf (126.22KB)

Engineering Documents

Outline	SOD-123FL
V_RRM [V]	400V
I_o [A]	0.5A
I_FSM [A]	10.0A
I_R [mA]	0.010mA
V_FM [V]	1.10V
@IFM [A]	0.5A
Operating Temperature Range	-55℃ ~ 150℃
R_th(j-c) [°C/W]	25 (j-l)°C/W
Connection type	A
Packaging style	Reel
Quantity per Package	3000
Weight	0.012g

FAQ

View All

When connecting one-chip type elements such as axial type products or miniature SMD products, 1:0.6 (62.5% : 37.5%) would be an approx. value as a general theory. Since two-chip in an element such as represented by the TO-220 type is a package and has good heat balance, the good flow dividing ratio would be 1:0.8 (55.6% : 44.4%).

The followings are recommended storage conditions for our power device products:

[Before unpacking]
Storage temperature: 5 to 35℃ / Storage humidity: 45 to 70% RH

MSL standards are defined for SMDs to be reflow-soldered, and all our products are MSL: 1. (Unneeded damp proof packing)

All values except for the graph of Junction capacitance vs. Reverse Voltage of SBD products are maximum values, which are guaranteed. Graphs of Junction capacitance vs. Reverse Voltage show typical values (TYP). The curves of the average forward current rating are formed by connecting points where the junction temperature reaches 150℃.

Related Glossary

View All

A method of mounting components on a printed circuit board (PCB) by inserting component leads to be soldered into through-holes of a PCB and dipping it into a solder bath to mount the components.

[Diode]Allowable peak reverse voltage repetitively applicable to diode.
[Thyristor]Allowable peak reverse voltage repetitively applicable between anode and cathode.

Range of ambient temperature while not operating.

PN type junction rectifying device. Diodes that rectifies a commercial frequency that is alternating current.