Electronic Components & Devices

Terminology - Connector Trivia vol.2 -

2208c_mv_pc_e.png 2208c_mv_sp_e.png

Here are some of the most common technical terms used in the connector industry, from terms related to the structure and parts of the connector to failure cases.

Connector Structure and Part Names

Here is a case of FPC connector to illustrate its composition.

A connector mainly consists of an actuator, metal fitting, contact, and insulator.
See below for each application and material. The meaning of each part is explained in the Glossary.

Connectors Major Components

Glossary

Components and Related Terms

Components

Name

Synonyms

Description

Actuator

Slider

Parts to lock or temporary hold when mated.
In case of FPC/FFC connector, parts that fix or hold the cable.

Actuator

Insulator

Molded part
Resin part
Housing

Resin molded parts.
The insulator that forms the entire connector and protects the contacts (wires).

Insulator

Contact

Terminal

Metal parts to provide contact and energizing functions.

Contact

Tail

Lead

Where the contacts/terminals are soldered.

 

Related Terms

Name

Synonyms

Description

Coplanarity

Flatness

Maximum height from board surface to contact tail.
Variance of lead to board surface.

Coplanarity

Pitch

-

Distance between terminals.
Set by miswiring prevention and rated current/voltage.

Pitch

Plug / Receptacle

Male / Female
Headers / Sockets

Plug: The part to insert the contact. The shape that is on the insertion side when it is mated.
Receptacle: The part into which the contact is inserted. The shape that becomes the receiving side when mated.

FPC

Flex cable

Short for Flexible Printed Circuits. A cable with printed circuits.

FPC

FFC

Flex cable

Short for Flexible Flat Cable. A cable consisting of flat laminated wires.

FFC

 

Type

Name

Description

ZIF

Short for Zero Insertion Force. When inserting or removing the FPC/FFC, the connector terminal and conductor of FPC/FFC are brought into contact and conducted by operating a locking mechanism such as an actuator/slider. A connector with reduced insertion and removal force.

 

Related Products Can Be Found Here

ZIF

Non-ZIF

Connectors without ZIF structure. Insertion force is required when inserting the FPC/FFC into the connector. The connector terminal and conductor of the FPC/FFC are in constant contact from the moment they touch the terminal at the insertion port until they are pushed in. While the workability and cost are good, the cable retention force can be weak in case of small pin counts, and a high insertion force is required for high pin counts.

 

Related Terms
LIF: Short for Low Insertion Force. A structure that reduces the insertion force.

 

Related Products Can Be Found Here

Non-ZIF

Vertical

The connector mating direction is perpendicular to the mounting board surface.

Vertical

Right Angle (RA)

The connector mating direction is horizontal to the mounting board surface.

Right Angle

 

Terms for Failure Cases

Name

Description

Weld

A line that forms a joint when molten materials, such as resin, solidify.

Weld

Crack

-

Crack

Contamination

Foreign matter entering the resin. Dirty resin.

Contamination

Short shot

A lack of resin filling.

short shot

Burrs

A protrusion that pops out of its normal shape.

Burrs

Solder fillet

The shape when soldered.

Solder fillet

Blisters

A blister-like phenomenon on the surface of the resin. Also called a bubble.

Blisters

 

Learn More About Connector Terminology Here Glossary of Electronic Components

 

Click Here for Inquiries

Comprehension Test

Q. What is the name of (1) to (3)?
 Tips

(1) Parts to lock or temporary hold when mated.
(2) Metal parts to provide contact and energizing functions.
(3) Resin molded parts.

Comprehension Test

 

Answer (Click to Check)
  • A. (1)Actuator  (2)Contact  (3)Insulator

 

List of Connector Trivia Articles

vol.1 What is a Connector?

vol.2 Terminology

vol.3 Insulator

vol.4 Contact (Terminal)

vol.5 Evaluation Test (Basics)

vol.6 Evaluation Test (Special Edition)

vol.7 The History of Kyocera's FPC/FFC Connectors

vol.8 Evolution of FPC/FFC Connectors

 

Connectors Top Page