609069900710800 4.생산 중지품

기기 내의 각 유니트, 특히 보드로의 전원공급용으로 개발한 프레스핏단자의 터미널블럭입니다. 납땜고정방식에서 보여지는 열영향이 거의 없습니다.

일반 산업 기기, 전원 장치 등의 용도에 적절하고 있습니다.

이메일로 보내기

Distributor Inventory

Distributor	Part Number	Uploaded	Country / Region	Quantity	Buy

Distributor	Part Number	Uploaded	Country / Region	Quantity
Distributor	Buy

Please check the latest information on each distributor's website

애플리케이션

산업기기
전원 장치

사양

핀간격 [mm]	2.540mm
극수	10
기판실장방법	Press-fit
사용온도범위	-55℃ ~ 105℃
정격전류 (신호핀）	AC/DC 3A/Contact
정격전압	AC 300V DC 250V/Contact
Quantity per Package	300
포장규격표	30503064.pdf (168.27KB)

포장 사양

Quantity per Package	300
포장규격표	30503064.pdf (168.27KB)

엔지니어링 문서

Environmental data

RoHS 규제 대응	문의

FAQ

일람

For ISO/IATF status, please click here.

Please apply using the form below.
To Access the Test Report Search Page

Related Glossary

일람

A solderless method to mount components on a printed circuit board. Contacts are pressed into through holes of a printed circuit board to make a conductive connection. Because it is solderless, no solder bridges, contact failure due to flux splash or penetration, or thermal deterioration of material will occur.

An insulating body or generic name for insulating materials constituting the outer shell of a connector that holds or accommodates contacts or post pins. It is also called a housing or mold.

Terminals, leads or pins contained in connectors, or also contacting part of the terminal/lead/pin. Metal parts or metallic portions responsible for conducting electricity when connectors are mated or connected. There are various kinds of contacts, such as tuning forks and bellows.