SF25-0847E9SSA1

2.5 x 2.0 mm size SAW Filter for base stations

이메일로 보내기

애플리케이션

기지국

생산 현황

Distributor Inventory

Distributor	Part Number	Uploaded	Country / Region	Quantity	Buy

Distributor	Part Number	Uploaded	Country / Region	Quantity
Distributor	Buy

Please check the latest information on each distributor's website

생산 현황

2.양산품

포장 사양

포장	Reel
Quantity per Package	3,000

Environmental data

RoHS 규제 대응	Yes

RoHS_SF25.pdf (49.67KB)

REACH_SF25.pdf (181.51KB)

Halogen-Free_SF25.pdf (47.86KB)

TSCA_SF25.pdf (162.22KB)

엔지니어링 문서

Characteristic Data

SF25-0847E9SSA1_DS.pdf (749.00KB)

BAND	20Rx 8Rx
크기	2.5 x 2.0mm
타입	Unbalanced Type
높이 (Max.)	0.90mm
사용온도범위	-40℃ ~ 95℃
포장	Reel
Quantity per Package	3,000

FAQ

일람

Dry the packed and taped products one time for 10±1 hours at 60±2℃ and 10% RH or less.
Put the products in a heat-resistant container and dry it one time for 10±1 hours at 60±2℃ and 10% RH or less, for 8±1 hours at 70±2℃ and 10% RH or less, or for 6±1 hours at 80±2℃ and 10% RH or less.

The MSL is 3 for all Kyocera SAW device products. (Needed damp proof packing)

We recommend up to three times.

When soldering, please use a spot heater under the following conditions:
・Preheating: 150℃ +/- 10℃ for 60 seconds at minimum
・Warm air temperature: 280℃ +/- 10℃ for 30 seconds at maximum

Related Glossary

일람

Electronic component which applies surface acoustic waves. Band pass filters, high pass filters, band eliminating filters, and duplexers are included in this category.