MPP5DA40 2.양산품

General rectifier diodes are diodes with PN junctions that rectifiy alternating currents with a commercial frequency (50Hz/60Hz) . They are also used as diodes to protect the power supply from reverse connection or reverse current.

이메일로 보내기

Distributor Inventory

Distributor	Part Number	Uploaded	Country / Region	Quantity	Buy

Distributor	Part Number	Uploaded	Country / Region	Quantity
Distributor	Buy

Please check the latest information on each distributor's website

애플리케이션

전원 장치
산업기기
자동차 (인포테인먼트)
자동차 (운전 / 안전 장비)

사양

시리즈	MP
Outline	SOD-123FL
V_RRM [V]	400V
I_o [A]	0.5A
I_FSM [A]	10.0A
I_R [mA]	0.010mA
V_FM [V]	1.10V
@IFM [A]	0.5A
사용온도범위	-55℃ ~ 150℃
R_th(j-c) [°C/W]	25 (j-l)°C/W
Connection type	A
포장	Reel
Quantity per Package	3000
제품 질량	0.012g

포장 사양

포장	Reel
Quantity per Package	3000
제품 질량	0.012g

엔지니어링 문서

Environmental data

RoHS 규제 대응	Yes

RoHS_MPP5DA40.pdf (459.49KB)

TSCA_MPP5DA40.pdf (47.61KB)

FAQ

일람

When connecting one-chip type elements such as axial type products or miniature SMD products, 1:0.6 (62.5% : 37.5%) would be an approx. value as a general theory. Since two-chip in an element such as represented by the TO-220 type is a package and has good heat balance, the good flow dividing ratio would be 1:0.8 (55.6% : 44.4%).

The followings are recommended storage conditions for our power device products:

[Before unpacking]
Storage temperature: 5 to 35℃ / Storage humidity: 45 to 70% RH

MSL standards are defined for SMDs to be reflow-soldered, and all Kyocera products are MSL: 1. (No need for damp proof packing)

All values except for the graph of Junction capacitance vs. Reverse Voltage of SBD products are maximum values, which are guaranteed. Graphs of Junction capacitance vs. Reverse Voltage show typical values (TYP). The curves of the average forward current rating are formed by connecting points where the junction temperature reaches 150℃.

Related Glossary

일람

A method of mounting components on a printed circuit board (PCB) by inserting component leads to be soldered into through-holes of a PCB and dipping it into a solder bath to mount the components.

[Diode]Allowable peak reverse voltage repetitively applicable to diode.
[Thyristor]Allowable peak reverse voltage repetitively applicable between anode and cathode.

Range of ambient temperature while not operating.

PN type junction rectifying device. Diodes that rectifies a commercial frequency that is alternating current.