10EDB60

파워 디바이스

디스크리트 일반 정류 다이오드

Axial (Rectifier Diodes)

10EDB60

General rectifier diodes are diodes with PN junctions that rectifiy alternating currents with a commercial frequency (50Hz/60Hz) . They are also used as diodes to protect the power supply from reverse connection or reverse current.

이메일로 보내기

애플리케이션

전원 장치
산업기기

생산 현황

Distributor Inventory

Distributor	Part Number	Uploaded	Country / Region	Quantity	Buy

Distributor	Part Number	Uploaded	Country / Region	Quantity
Distributor	Buy

Please check the latest information on each distributor's website

생산 현황

2.양산품

포장 사양

포장	Bulk
Quantity per Package	1000
제품 질량	0.170g

Environmental data

RoHS 규제 대응	Yes

RoHS_Diode_Axial.pdf (161.91KB)

TSCA_Diode_Axial.pdf (125.02KB)

엔지니어링 문서

규격표 / 도면

10EDB60-file.pdf (1022.76KB)

Outline	3Max ×φ2.7 (DO-41S)
V_RRM [V]	600V
I_o [A]	1.0A
I_FSM [A]	45.0A
I_R [mA]	0.010mA
V_FM [V]	1.00V
@IFM [A]	1.0A
사용온도범위	-40℃ ~ 150℃
R_th(j-c) [°C/W]	110.0 (j-a)°C/W
Connection type	A
포장	Bulk
Quantity per Package	1000
제품 질량	0.170g

FAQ

일람

When connecting one-chip type elements such as axial type products or miniature SMD products, 1:0.6 (62.5% : 37.5%) would be an approx. value as a general theory. Since two-chip in an element such as represented by the TO-220 type is a package and has good heat balance, the good flow dividing ratio would be 1:0.8 (55.6% : 44.4%).

All values except for the graph of Junction capacitance vs. Reverse Voltage of SBD products are maximum values, which are guaranteed. Graphs of Junction capacitance vs. Reverse Voltage show typical values (TYP). The curves of the average forward current rating are formed by connecting points where the junction temperature reaches 150℃.

The followings are recommended storage conditions for our power device products:

[Before unpacking]
Storage temperature: 5 to 35℃ / Storage humidity: 45 to 70% RH

Related Glossary

일람

PN type junction rectifying device. Diodes that rectifies a commercial frequency that is alternating current.

A method of mounting components on a printed circuit board (PCB) by inserting component leads to be soldered into through-holes of a PCB and dipping it into a solder bath to mount the components.

[Diode]Allowable peak reverse voltage repetitively applicable to diode.
[Thyristor]Allowable peak reverse voltage repetitively applicable between anode and cathode.

[Diode] Maximum average forward current of commercial frequency (50Hz/60Hz) sin wave under condition.
[Thyristor] Maximum average on-state current of commercial frequency (50Hz/60Hz) half sin wave under specified condition.

Range of ambient temperature while not operating.