30GFD60 4.생산 중지품

Fast recovery diodes are PN junction diodes with the same structure and function as general rectifier diodes. While general rectifier diodes are suitable for commercial frequency rectification, fast recovery diodes are suitable for high frequency rectification due to their fast reverse recovery time (trr).

이메일로 보내기

Distributor Inventory

Distributor	Part Number	Uploaded	Country / Region	Quantity	Buy

Distributor	Part Number	Uploaded	Country / Region	Quantity
Distributor	Buy

Please check the latest information on each distributor's website

대체품

애플리케이션

전원 장치
산업기기

사양

시리즈	Axial
Outline	DO-201AD
V_RRM [V]	600V
I_o [A]	3.0A
I_FSM [A]	45.0A
I_R [mA]	0.020mA
V_FM [V]	1.45V
t_rr [ns]	45.0ns
사용온도범위	-40℃ ~ 150℃
R_th(j-c) [°C/W]	13.0 (j-l)°C/W
Connection type	A
포장	Bulk
Quantity per Package	2000
제품 질량	1.050g

포장 사양

포장	Bulk
Quantity per Package	2000
제품 질량	1.050g

엔지니어링 문서

규격표 / 도면

30GFD60-file.pdf (935.20KB)

Environmental data

RoHS 규제 대응	Yes

RoHS_Diode_Axial.pdf (161.91KB)

TSCA_Diode_Axial.pdf (125.02KB)

FAQ

일람

It would be difficult to secure voltage balance in two high-speed FRDs connected in series directly (Connection where voltage protection is not coordinated). Especially for the commutation surge voltage in high-speed switching, shared voltage varies largely due to difference in reverse recovery characteristics of the two devices. Thermal influence of other components and exoergic environment also affect the difference largely. Therefore, it is possible that 100% of voltage would be applied to one device.
In order to suppress such differences, it is necessary to add a voltage dividing capacitor to each device to share the differences. There is no specified capacitance value for such voltage dividing capacitors because the value varies depending on the operating conditions. It is necessary to make sure whether the voltage can be surely shared by the capacitors so that their capacitances could be between several tens pF and several hundreds pF.
Ripping can be suppressed by these capacitors. In order to divide the steady reverse voltage in half, resistors in parallel are also required.
That is to say, adding capacitors or resistors is an only way to balance voltage. The point is that adding a resistor or a capacitor is an only way to get the voltage balance.

When connecting one-chip type elements such as axial type products or miniature SMD products, 1:0.6 (62.5% : 37.5%) would be an approx. value as a general theory. Since two-chip in an element such as represented by the TO-220 type is a package and has good heat balance, the good flow dividing ratio would be 1:0.8 (55.6% : 44.4%).

All values except for the graph of Junction capacitance vs. Reverse Voltage of SBD products are maximum values, which are guaranteed. Graphs of Junction capacitance vs. Reverse Voltage show typical values (TYP). The curves of the average forward current rating are formed by connecting points where the junction temperature reaches 150℃.

MSL standards are defined for SMDs to be reflow-soldered, and all Kyocera products are MSL: 1. (No need for damp proof packing)

The followings are recommended storage conditions for our power device products:

[Before unpacking]
Storage temperature: 5 to 35℃ / Storage humidity: 45 to 70% RH

Related Glossary

일람

PN type junction rectifying device. Diodes suitable for rectifying high frequency power supply with short reverse recovery time (trr).

[Diode]Allowable peak reverse voltage repetitively applicable to diode.
[Thyristor]Allowable peak reverse voltage repetitively applicable between anode and cathode.

A method of mounting components on a printed circuit board (PCB) by inserting component leads to be soldered into through-holes of a PCB and dipping it into a solder bath to mount the components.

[Diode]Allowable peak reverse voltage repetitively applicable to diode.
[Thyristor]Allowable peak reverse voltage repetitively applicable between anode and cathode.

[Diode] Maximum average forward current of commercial frequency (50Hz/60Hz) sin wave under condition.
[Thyristor] Maximum average on-state current of commercial frequency (50Hz/60Hz) half sin wave under specified condition.